Initial Setup

(Hint: Run WorldClock Lite and refer to the screen while reading this documentation page
from a printout.)
__________________________________________________________________________

Open WorldClock Lite either by double-clicking on its icon or selecting it from the
 menu, if you installed it there. Unless you happen to live in Los Angeles, CA, 
you will probably wish to change the WorldClock Settings to your location or to a 
location near you.  The setup will involve selecting a database location near to you,
in your same time zone, and possibly resetting your system clock.

Select Change Settings from the WorldClock Lite menu in the menu bar 
at the top of your screen.  

The features of the Change Settings screen most likely to be used by World-
Clock Lite users are the Select Location button and the time-setting facilities 
in the lower left of the screen.  Click on the Select Location button to bring up a 
scrolling list of 190 locations.  Scroll through the list and find one close to you, in  
                                           your time zone.  Click on the desired location and then click
                                         the Select button, or just double-click on the location.
                                           The display should adjust itself, indicating the new location
                                           in the title bar at the top of the WorldClock Lite window.
                                             
If the location you selected is in a different time zone than Los Angeles, WorldClock 
will have adjusted the hours automatically for the difference in time zones. 

                                         After setting the location, check the time in the digital clock 
                                           readout at the lower left of the display.  If you need to adjust 
                                           the hour, click on the hour in the lower left hand corner of the 
                                           screen.  The hour will be highlighted and an up-down arrow 
                                           will appear.  Click on the up arrow to adjust the hours ahead 
                                           and on the down arrow to adjust the hours back.  When the 
                                           hour is correct, click on the blank area of the window to the 
                                           left of the hour.  Similarly, you can adjust the minutes, sec-
                                           onds, or AM/PM settings.  

                                           Other settings that can be adjusted in the same way are the 
                                           day, month, and year. 

                                           Since WorldClock Lite does not permit additions to the 
                                           database, the latitude, longitude, and time zone readouts are 
                                           informational only, and cannot be adjusted.

If you have made any changes to any of WorldClock Lite's settings, including time, 
date, or location, or reset the location of any of the clocks, WorldClock Lite will ask 
you if you wish to save the changes when you quit.  If you click the Save button, the 
changes will be saved for your next sesson.  The system clock will also be set to the 
current time displayed by WorldClock Lite.  If you have just been experimenting, and 
don't want the changes saved, or don't want your system clock to be reset, click the No 
button.